Capture
So you've bought a battery holder and now you are wondering how to set it up properly?
- Using the provided 10mm D-Screw, fasten the holder to the L-Bracket using the middle screw hole of the L bracket. The battery holder will stick out towards the front of the camera more than it sticks out towards the back of the camera / your face and the bottom of the battery holder will sit flush against the base of the L bracket.
- If you are using the correct D-bolt (10mm), when tightened, it will not stick out on the Capture-side of the L-bracket.
- Next, add your usual 12mm Position Locking D-screw to the L-Bracket. It will fit in one of the two screw positions above the Battery Holder.
- Slide the Capture unit into position and fasten into position as per usual (using the 12mm position locking D-bolt).
- Finally, slide the 5000mAh Battery Bank into the holder, making sure that it feels secure. Then you are free to plug the Capture unit into the Battery Bank and enjoy the extra battery life!
- With your camera attached, it will look something like this:
