Capture
- With the Capture device powered on, press the Power button once. The Capture unit will enter 'pairing mode' for 10 seconds and the blue Reader light will begin to flash rapidly.
- While the blue Reader light on the Capture unit is flashing, press the center (blue) button on the Reader. The Reader will show a logo on the screen as it boots and then connects to the Capture unit.
- When connected, the blue Reader light on the Capture unit will stop flashing and stay solid to indicate a connection. Meanwhile, the Reader will display useful information as in the video above.
Disconnecting
If you need to disconnect a Reader, press the power button on the Capture unit again. The Capture unit will drop the current Reader connection and enter pairing mode again. You can either reconnect with the same Reader by pressing the center Reader button again (while the blue 'Reader' light is still flashing) or pair with a new Reader by pressing that Reader’s center button instead.